
In “trout flies of the west“, by Schollmeyer and Leeson, this fly is presented as a Baetis emerger. Baetis are part are part of the mayfly family and very small. They are 1/8 inch to 3/8 inch long excluding tails. They hatch out widely throughout the US in spring, summer and fall, depending on location. They fish well as a dropper behind a dry fly.
HOOK: TMC 2487, Dai-Riki 135, Targus 2487. Crimp barb.
THREAD: Black 8/0.
Attach about 2/5 back on shank with about 6 wraps.
Leave bobbin hanging at rear of wraps.
BUBBLE: One petite or extra small clear glass bead PLUS 5X Tippet.
Thread bead onto tippet.
Bend tippet and hold strands together.
Place on hook shank, bead forward of eye, tippet to rear.
Make several thread wraps.
Pull on tippet moving bead into position two eye lengths behind eye.
Make snug thread wraps 1/8 inch to rear.
Bend tippet toward eye and snuggly tie down to behind bead.
Cut excess.
TAIL: Dark rust, chicken feather with stiff barbs.
Cut approximately 12 barbs off stem of feather keeping tips aligned.
Lay on top of shank, tips extending about two hook lengths to rear of shank.
Secure to shank behind bead with wraps halfway back.
Pull on barbs positioning tips so they are hook length beyond shank.
Attach to shank with touching wraps to slightly beyond hook shank.
Cut excess barb butts behind bead.
BODY: Same black thread.
Touching thread wraps forward, forming slender tapered body up to bead.
THORAX: Dark olive, super fine dubbing.
Wrap dubbing, mainly behind bead, but a couple wraps around base and a couple in front of bead.
HEAD: Same black thread.
Wrap small thread head.
Whip finish.
Cut thread.
Posted on November 19th, 2026
